Outgoing Message; Record Memo; Operating The Answer Machine On The Base Station - Swissvoice Aeris 214 Bedienungsanleitung

, select Ans. Machine and press OK.
• Press
Select TAM Settings and press OK.
•
Select Answer Mode and press OK.
•
• Select the desired operating mode and press OK.

Outgoing message

Your answer machine comes with two standard pre-recorded outgoing messages. You
can replace the standard outgoing message with a personal one:
, select Ans. Machine and press OK.
• Press
Select TAM Settings and press OK.
•
Select OGM Settings and press OK.
•
Select Ans & Rec or Answer only and press OK.
•
Select Record Mess and press OK.
•
• Speak your outgoing message into the handset microphone.
• Press OK to end recording. The recorded outgoing message is played back.

Record memo

You can leave a message behind for other internal users by recording a memo:
, select Ans. Machine and press OK.
• Press
Select Memo and press OK.
•
Recording appears. Speak after the tone.
•
• Press OK to end recording.
Listening in
Incoming messages are played back over the base station loudspeaker. You can
adjust the volume by pressing the keys + or -. Press the left softkey on the handset to
listen in. Press the Talk key to answer an incoming call.

Operating the answer machine on the base station

If you have new messages, the message counter is flashing. The messages are played
back beginning with the most recent.
® ■
• Press / to start playback.
• During playback the following options are available:
Aeris 214 / 214T
Aeris 214 / 214T
33