Cleaning And Maintenance - Qlima LK 2100 Gebrauchsanweisung

FUNCTIONS OF ALL BUTTONS

CLEANING AND MAINTENANCE

1.
2.
3.
4.
5.
6.
Filling notice
1.
4
46
POWER:Start or stop operation.
COOL: Start the cooling function.
SPEED: Select from 1 to 3.
SWING : Swing air flow direction left and right.
WIND TYPE (MODE): Air flow selection for nature sleep or normal
TIME: Adjust and set the time.
Warning: Please shut off the unit and unplug before cleaning.
Outer filter, wet curtain assembly cleaning: If there is foreign matter is atta-
ché on the filter, the wind will be influenced. Clean the filter wet curtain
assembly at least once a month. Remove the wet curtain in order, use deter-
gent and soft brush, soak with detergent for a few minutes, wash and dry the
wet curtain.
Tank cleaning: Unplug the power cord, turn the water tank knob to the hori-
zontal direction, pull out the water tank and wipe the water tank with proper
detergent
Please use wet cloth to clean the product housing. Do not use water to rinse
the unit. Do not use abrasive cleaning liquids or chemical agents to clean the
product.
Installation after cleaning: Install the filter, wet curtain assembly, water tank
and other components in sequence, make sure the installation is correct, plug
in the power, and confirm that the product is working properly.
Maintenance: When the product is not used for a long time, unplug the power
plug, package the product and prevent dust from entering the body; ensure
that the wet curtain and the filter are dry before installation, and there is no
water in the water tank; after packaging, store in a dry and ventilated place
Fill the water in line with water level. Unplug the unit during refilling.