Grundig CMS 5000 Bedienungsanleitung Seite 32

MAIN­OPERATION­
Bluetooth
In Bluetooth mode, you can turn on the Bluetooth
of your Bluetooth device. Press and hold
»BTPAIR« to turns Bluetooth discoverable. From
your Bluetooth device, search the HiFi System
Grundig CMS 5000/ Grundig M 4050 to
pairing. When it is waiting for pairing, there is
a blinking Bluetooth icon at the bottom. If the
pairing is successful, the Bluetooth icon becomes
steady. Control the music playback from your
Bluetooth device.
RCA­
In RCA in mode plays audio from an external
source. Turn the volume low on both the radio
and, if adjustable, the audio source device. Enter
RCA mode, then adjust the volume as required.
Sleep­
To set the sleep timer, select Sleep under Main
menu. Or press » « on the remote control to
set. Choose from Sleep OFF, 15, 30, 45 or 60
minutes and confirm. Once you select a sleep
period, the system returns to the now playing
screen.
32­ ­ ENGLISH
­--------------------------------------------------------------------------------------------------
Alarm
There are two versatile wake-up alarms with
snooze facility. Each alarm can be set to start in
a particular mode.
Select Alarms under Main menu to set or change
an alarm. Alternately, press and hold »ALARM/
BACK« on the device, or press »ALARM1«,
»ALARM2«on the remote control to conligure.
After setup all the parameters, select Save to
activate. The screen shows active alarms with an
icon at the bottom left.
At the set time, the alarm will sound. To tempora-
rily silence, press »SNOOZE«.You can change
the snooze period. The radio returns to standby
for the set period, with the silenced alarm icon
flashing.
Press and hold » /­MODE« or press » « on
the remote control to turn it off.
Equaliser­
Several preset EQ modes are available: Normal,
Flat, Jazz, Rock, Movie, Classic, Pop, News and
My EQ. Press »EQ« to select. A user-defined set-
ting is available; create your own EQ with custom
bass, treble and loudness settings.
Then choose My EQ to activate the customized
EQ settings.
Alternatively, rotate the » BASS­/­TREBLE « reels
-
or press » ­BASS­+­« / »
remote control to adjust bass or treble, then press
»OK/SCAN« to confirm. This will activate My
EQ directly.
Network­
Network­wizard:
Enter to search AP SSID, then input the WEP /
WPA key or choose Push Button/Pin/Skip WPS
to connect to the wireless network.
-
­TREBLE­+ « on the