Cleaning the cover plate
EN
ATTENTION
Surface damage caused by aggressive and scouring
cleaning agents
▶
Never use aggressive cleaning agents that contain
chlorine or are acidic, abrasive or corrosive.
Prerequisite
– Cleaning mode is activated.
1
Clean the cover plate with a soft cloth and a mild
liquid cleaning agent.
2
Dry the cover plate with a soft cloth.
Setting the flush time
The flush time can be adjusted to suit the user's
needs using a Geberit app.
Replacing the batteries
Dead batteries are displayed as follows:
LED in the
sensor window
Flashing
Lights up
Prerequisite
– 2 replacement batteries (alkaline batteries, 1.5 V,
AA) are available.
Meaning
Battery voltage is low, flush still
actuates.
Battery is dead, flush no longer
actuates.