Geberit 116.086.00.1 Instandhaltungsanleitung Seite 37

Selecting the flush mode
Hybrid mode
The flush is not actuated during use (waterless operation). However, a periodic flush is actuated once the
delay time or the flush interval has elapsed. The flush time is determined by the [flush time] (t flush) value.
• Use [mode]: Flushes after the delay time (t timeout) has elapsed. No flush is actuated if the delay time is
still active.
Start of delay time:
– From the first use
– From the next use once the previous delay time has elapsed
• [Interval] mode: Flushes after the flush interval (t Int) has elapsed. No flush is actuated if the flush interval
is still active.
Start of flush interval:
– From the first use
– At the end of the previous flush interval, regardless of the number of uses
Purging flush
A flush is actuated at the end of the [flush interval] (t Int), regardless of the number of uses. The flush time is
determined by the [flush time] (t flush) value.
Start of flush interval:
• From the first use
• At the end of the previous flush interval, regardless of the number of uses
The purging flush can be used together with the interval flush or the hybrid mode.
36028804645336075 © 11-2022
970.152.00.0(01)
EN
37