Geberit 116.086.00.1 Instandhaltungsanleitung Seite 27

Malfunction
Incorrect flushes (too soon, too
late, unwanted)
Flushing out of the urinal
ceramic is inadequate.
Water is splashing out from the
urinal ceramic.
Residual water in urinal
ceramic appliance is not
draining
36028804645336075 © 11-2022
970.152.00.0(01)
Cause
Unsatisfactory user recognition
due to urine scale deposits in
the urinal trap
Solenoid valve defective
Control defective
Flush time set incorrectly
Basket filter in solenoid valve
clogged
Water pressure too low
Throttle not opened enough
Flow rate too high
Urinal trap or discharge pipe
clogged
Action
▶ Clean the urinal trap. → See "Cleaning
the urinal trap", page 28.
▶ Replace the solenoid valve. → See
"Replacing the solenoid valve",
page 31.
▶ Replace the control. → See "Replacing
the control", page 30.
▶ Set flush time. → See "Setting the flush
time", page 28.
▶ Clean the basket filter. → See
"Cleaning or replacing the basket filter",
page 28
▶ Test the water pressure.
▶ Open the throttle.
▶ Mount a flow limiter. Flow limiters are
available as accessories, art. no.
242.484.00.1.
▶ Clean the urinal trap. → See "Cleaning
the urinal trap", page 28.
▶ Replace the urinal trap. → See
"Replacing the urinal trap", page 29.
▶ Check the discharge pipe.
EN
2 / 2
27