Dreame R20 Bedienungsanleitung Seite 18

Care & Maintenance
EN
3. Remove the pre-filter first, then lift the handle of the cyclone assembly and turn it
counterclockwise until it stops, then pull to lift out the cyclone assembly.
4. Wipe the dust cup with a soft wet cloth. Pay attention to wring out the discloth before
using.
5. Rinse the cyclone assembly and pre-filter until they are clean. After washing, air dry for
at least 24 hours.
Note: It is recommended to clean the pre-filter at least once every 3 months and the
cyclone system at least once every 6 months.
13
1
Cyclone Assembly
2
3
To reduce the risk
of electric shock, do
not rinse the dust
cup with water.
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6
Pre-Filter