VOLTCRAFT SEM5000 CH Bedienungsanleitung Seite 94

5. Viewing stored measurements
The energy logger stores the data of the last 3 measure-
ments.
You can use the following functions if the measurement was
completed correctly.
Briefly press the
stored measurements. Repeatedly press the
ton to select the measurement you want to view. The
respective measurement time is displayed in the top line.
Briefly pressing the
data (bottom display line: ENERGY = energy in kWh,
COST = cost, CO2 = CO
94
button in the current mode to view
button several times displays the
value).
2
but-