Pushing On/Removing The Comb Attachments 12 6.3 Cutting Hair; Cutting Hair - Silvercrest SHSK 3.7 A1 Bedienungsanleitung

__NAS280611_Haarschneider_kompakt_B6.book Seite 13 Freitag, 4. November 2016 6:17 18
Pushing on
• Figure A: to push on one of the comb attachments 7, push
it over the blade unit 1 from the front, and press it upwards
at the rear of the device until it audibly clicks into the
mount 8.
Removing
• Release the comb attachment 7 at the mount 8, and push it
forwards off the blade unit 1.

6.3 Cutting hair

DANGER! Risk of electric shock due to mois-
ture!
The hair trimmer and the power unit 6 must not be sub-
merged in water, and must therefore not be operated in a
shower/bath.
WARNING! Risk of injury!
The tips of the blade unit 1 are sharp. Handle with care.
WARNING!
Do not use the device on open wounds, cuts, sunburn or blis-
ters.
NOTE:
• Trimming hair is possible both in battery mode and in mains
operation.
• Comb through long hair before cutting it.
• Select the appropriate comb attachment 7 for the desired
cutting length:
(1.5/2.0/2.5/3.0/4.5/6.0/9.0/12.0/15.0 mm).
13
GB