Beurer medical BC 85 Gebrauchsanweisung Seite 26

• Press the relevant memory button (M1 or M2).
AM flashes on the display.
The average value of the morning meas-
urements for the last 7 days is displayed
(morning: 5.00 a.m. – 9.00 a.m.).
• Press the relevant memory button
(M1 or M2).
PM flashes on the display.
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).
Individual measured values
• When the relevant memory button
(M1 or M2) is pressed again, the last
individual measurement is displayed
(in this example, measurement 03).
• When the relevant memory button
(M1 or M2) is pressed again, you can
view your individual measurements.
• To switch the device off again, press the START/STOP
button .
You can exit the menu at any time by pressing the
START/STOP button
All manuals and user guides at all-guides.com
.
Deleting measured values
• To clear the memory of the relevant user memory, you
must first select a user memory.
• Start the retrieval of the average values.
• Press and hold the M1 / M2 memory buttons for 5 sec-
onds.
CL and 00 appear on the display.
All the values in the current user memory
are deleted.
The device will then switch off automati-
cally.
Deleting individual measurements
To clear individual measurements from the relevant user mem-
ory, you must first select a user memory.
• Start individual measurement access.
• Press and hold the memory button M1 / M2 for 5 seconds
(depending on the user memory you are in).
• The selected value is deleted. The device briefly displays CL
00.
• If you would like to delete other values, repeat the process
described above.
You can switch off the device at any time by pressing the
START/STOP button
26
.