Sunny Health & Fitness Magnetic Mini Exercise Pedal Cycle Bedienungsanleitung Seite 12

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-
8669).
7R
3R
47R
7R
3R
48
3R
47R
7R
48
49
9
47L
3L
3L
48
48
49
47L
7L
3L
STEP 2:
NOTE: The Pedals (No. 7L & No. 7R) are marked "L"
and "R" for Left and Right.
WARNING! Read instructions carefully as improper
assembly may cause permanent damage to your bike.
NOTE: Left Nylon Nut (No. 47L) is blue on the inside
and Right Nylon Nut (No. 47R) is white on the inside.
Remove the 2 Left & Right Nylon Nuts (No. 47L &
No. 47R) located on the Pedals (No. 7L & No. 7R).
Align the Left Pedal (No. 7L) with the Left Crank (No.
3L) at 90°. Gently insert the Left Pedal (No. 7L) into
the Left Crank (No. 3L) and turn the Left Pedal (No.
7L) counter-clockwise as tightly as you can with your
7L
hand. Use Spanner (No. 48) to tighten and secure.
Turn the Left Nylon Nut (No. 47L) clockwise as tightly
as you can with your hand. Use Spanner (No. 48) to
7L
hold the pedal bolt on the Left Pedal (No. 7L) and use
Spanner (No. 49) to turn the Left Nylon Nut (No.
47L) clockwise at the same time, until it is tightened
on to the Left Crank (No. 3L).
Align the Right Pedal (No. 7R) with the Right Crank
(No. 3R) at 90°. Gently insert the Right Pedal (No.
7R) into the Right Crank (No. 3R) and turn the Right
Pedal (No. 7R) clockwise as tightly as you can with
your hand. Use Spanner (No. 48) to tighten and
secure.
Turn the Right Nylon Nut (No. 47R) counter-
clockwise as tightly as you can with your hand. Use
Spanner (No. 48) to hold the pedal bolt on the Right
Pedal (No. 7R) and use Spanner (No. 49) to turn the
Right Nylon Nut (No. 47R) counter-clockwise at the
same time, until it is tightened on to the Right Crank
(No. 3R).
The assembly is complete!
11