IKEA LAGAN Serie Bedienungsanleitung Seite 8

8
2. First pull the filter (A) out of the filter
assembly by compressing it gently. Then
the filters (B) and (C) can be detached.
3. Rinse the filters (A), (B) and (C) with water.
If necessary, use a soft cleaning brush.
4. Re-assemble the filters shown in the
figure below.
C
B
A
5. Insert the filter assembly into position,
and turn it clockwise until it locks.
Make sure the arrows on the filter (B) and
(C) are aligned, as shown in the figure
below.
To download the full version visit www.ikea.com
Cleaning the spray arms
We recommend to clean regularly the upper
and lower spray arms to avoid soil to clog
the holes.
Clogged holes can cause unsatisfactory
C washing results.
1. Pull out the upper and lower baskets.
B
2. To disengage the upper spray arm from
the upper basket, locate the nut in the
A
center position of the upper arm and turn
it counterclockwise to remove.
3. To detach the lower spray arm from the
bottom of the appliance, just pull it up to
remove.
ENGLISH