SAFETY INSTRUCTIONS:
- Read these instructions carefully before starting the instal-
lation. Incorrect electrical connections could damage the
receiver unit, cause an electric shock and/or constitute a re
hazard.
- The electrical connection and maintenance of this remote
control may only be performed by a trained electrician, a
quali ed electrician, or a suitably quali ed person.
- The power source/cable to which this remote control is con-
nected must be provided with an all-pole disconnect (fuse or
breaker).
- Before starting work, check several times whether the vol-
tage is switched off at the fuse or breaker!
- This remote control is only intended for 220 - 240 V /~ 50 Hz
voltage. The house network must be earthed.
- Never use in damp or wet rooms, garages, rooms with ex-
plosive atmospheres or gases or outdoors.
- Route power cables in such a way that they cannot be
pinched or damaged.
- Caution: Batteries may age and damage the remote control.
Replace the batteries in good time and dispose of the old
batteries in a way that is inaccessible to children and envi-
ronmentally friendly.
- Never use this remote control together with upstream speed
regulators, transformers or dimmers. Fire hazard!
- Only suitable for controlling AC ceiling fans (not EC/DC mo-
dels).
- Do not use for any other purpose!
GB
9