CasaFan Macau Montage- Und Bedienungsanleitung Seite 35

Operation and functions of the remote control FB-FNK-D Multicode
GB
IMPORTANT: After completing the installation and switching the mains voltage back on, please press the
„3" button for the highest fan speed on the handheld transmitter to switch on the highest speed. Now
pull on the pull chain of your fan until it runs at maximum speed.
If your fan has a light, press the light button on the display to switch on the light. If the lighting does not
light up, pull the pull switch on the lighting so that the lighting lights up.
Do not change the position of the pull switch from now on!
Symbols and operation with the handheld transmitter
2
M
3 1
H L
0
OFF
2
M
3 1
L
H
0
OFF
2
M
3 1
L
H
0
OFF
Mounting the wall bracket for the handheld transmitter of your remote control
If necessary, you can mount the wall bracket of the remote control on a wall as shown in Fig. 7.
14
Use the „2" button to switch
your ceiling fan to medium
speed.
Use the „3" key to switch
your ceiling fan to high
speed.
Use the „1" button to switch
your ceiling fan to low
speed.
2
M
Use the „0" button to
3 1
switch off the motor of your
H L
ceiling fan.
0
OFF
With the „LIGHT" button,
you can switch the light of
2
M
your ceiling fan on or off by
3 1
brie y pressing it.
L
H
0
If you keep this button
OFF
pressed, you dim the light
of your ceiling fan.
Fig. 7