Troubleshooting; Disposal Information - Makita PF 4000 Originalbetriebsanleitung

Trouble shooting
Problem
The motor will not work
The motor works but the pump will not convey
Insufficient flow rate
Repeated switching off with disconection of the protection switch
Causes
No mains voltage, the floating swittch will not connect
Defective protection device
Motor protection disconnected, pump straining/blocked
Dry operation protection disconnected,
the water level has fallen too much
Defective pump
Clogged suction opening
Check valve blocked or delivery pipe bent
Delivery pipe clogged
Foreign bodies in the pump, pump impeller blocked
The pump runs dry
If it is not possibile to eliminate the trouble, please call your local Makita
service centre. To avoid damage during transport, please ship in the
ORIGINAL PACKING.

Disposal information

Only for EU countries
Do not dispose of electric equipment together with household waste material!
In observance of European Directive 2002/96/EC on waste electric and electronic
equipment and its implementation in accordance with national law, electric
equipment that has reached the end of its life must be collected separately and
returned to an environmentally compatible recycling facility.
11

•
•
• •
•
• •
• •
• •
• •
• • •
• •