Model Type - Makita PF 4000 Originalbetriebsanleitung

In the event of the pump failing, repair work may only be carried out by Makita
authorised service centres. Only genuine spare parts must be used.
It is notified that in conformity with the law on product liability we cannot be
held responsible for the damage caused by our appliance:
a) because of improper repairs not carried out by the personnel of the
assistance points authorized by us;
b) or if GENUINE SPARE PARTS are not used to replace parts;
c) or if the indications and provisions given in the instructions handbook are
not complied with. The same provisions hold for the accessories.
Resistance
The maximum temperature of the delivery liquid should never exceed +35°C in
continuous operation. Inflammable, combustible or explosive liquids cannot
be conveyed with this pump! In particular, do not use engine fuels, detergents,
or other chemical products.
Use
CAUTION! Sector of use

MODEL TYPE:

"DRAINAGE" - To transfer and empty fresh to slightly polluted water from
rainwater barrels and casks.
"VORTEX" - Portable submersible pump for discharge and waste water with
solids in suspension.
To achieve excellent motor cooling the pump casing is provided with a breather
hole that enables water to flow out. The pump must be protected from running
dry.
Starting
First put the pump into water and then connect the plug. The pump is ready
for use.
CAUTION:
Inflammable, combustible or explosive liquids cannot be conveyed with
this pump! In particular, do not use engine fuels, detergents, or other
chemical products.
9
