Werbung
Verfügbare Sprachen
Verfügbare Sprachen
After the first 150 hours of operation you have to replace the gearbox
oil. Gearbox oil changes bring about an essential increase of the
tool's lifetime.
After approximately 250 hours of operation the carbon brushes have
to be checked by a specialist and if necessary removed (only use
original carbon brushes).
Have switch, cable and plug checked by an electric specialist
quarterly.
Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts.
EIBENSTOCK's application service team will gladly answer questions
concerning our products and their accessories.
Environmental Protection
Raw material recycling instead of waste disposal
In order to avoid damages on transportation, the power tool has to be
delivered in sturdy packing. The packing as well as the tool and its
accessories are made of recyclable materials and can be disposed
accordingly. The tool's plastic components are marked according to their
material, which makes it possible to remove environmental friendly and
differentiated because of available collection facilities.
Noise Emission / Vibration
The indication of noise emission is measured according to DIN 45 635, part
21. The level of acoustic pressure on the work place could exceed 85 dB
(A); in this case protection measures must be taken.
Wear ear protectors!
The typical hand-arm vibration is below 2.5 m/s².
Measured values determined according to EN 60 745.
Only for EU countries
Do not dispose of electric tools together with household
waste material!
In observance of European Directive 2012/19/EU on waste
electrical and electronic equipment and its implementation in
accordance with national law, electric tools that have
reached the end of their life must be collected separately
and returned to an environmentally compatible recycling
facility.
27
Werbung
