LENCO PDR-060WD Benutzeranleitung Seite 15

Press and hold the MENU•INFO button for 2~3 seconds to enter menu set up
list. Rotate the TUNE knob to select <Time/Date>, press the ENTER button to
enter. Rotate the TUNE knob to select <Set Time/Date>/<Set Hour System>/
<Set Date Format>/<Clock style>/<Auto Update>.
Set Time/Date: Press the ENTER button to enter time & date set up: Date - Month -
Year - Hour- Minute (rotate the TUNE knob to select the numbers and press the
ENTER button to confirm.)
Set Hour System: Press the ENTER button to enter 24h/12h set up, rotate the TUNE
knob to select and press the ENTER button to confirm.
Set Date Format: Press the ENTER button to enter Date Format setting, rotate the
TUNE knob to select and press the ENTER button to confirm.
Alarm clock Set up
This device can set 2 sets alarms.
1. Press the ALARM button to enter alarm clock setting.
2. Rotate the TUNE knob to select Alarm 1/Alarm 2, and press the ENTER button
to confirm.
Alarm: Press the ENTER button to select ON/OFF
Time: Press the ENTER button to enter alarm time setting, rotate the TUNE
knob to select the numbers, press the ENTER button to confirm.
Source: Press the ENTER button to enter, then rotate the TUNE knob to select
FM/DAB/Buzzer as alarm source, press the ENTER button to confirm.
Repeat: Press the ENTER button to enter, then rotate the TUNE knob to select
Once/Daily/Weekends/Workday, press the ENTER button to confirm.
Volume: Press the ENTER button to enter, then rotate the TUNE knob to select
alarm volume. press the ENTER button to confirm.
3. When the alarm clock rings, press the snooze button to activate snooze
function. After 5 min, the alarm will ring again.
4. Press the ALARM button (or press the STANDBY button) to stop alarm clock, the
device goes into standby mode.
Sleep Timer Set up
1. Press and hold the MENU•INFO button for 2~3 seconds to enter menu set up
list, rotate the TUNE knob to select SLEEP, then press the ENTER button to
enter sleep timer setting.
2. Rotate the TUNE knob to select 15 minutes/30 minutes/.../2 Hours.
3. Press the ENTER button to confirm sleep timer setting.
4. The device will go to standby mode after 15 minutes/30 minutes/.../2 Hours.
(if you select "OFF" and then press the ENTER button, sleep timer will be
turned off).
15