LENCO PDR-060WD Benutzeranleitung Seite 12

Power ON/OFF
When using this radio, please pull out the telescopic antenna.
switch on the back of the device to ON/OFF side to power on/off the device.
DAB Radio
1. Upon being powered on, the device will go to DAB mode automatically and will
start searching for available DAB stations, which will be stored after the search
is complete. (If the device has already searched for radio stations, you can also
press and hold the SCAN button to perform automatic searching).
2. Rotate the TUNE knob to select your desired DAB station, then press the
ENTER(TUNE) button to play. Rotate the VOLUME knob to adjust volume.
Press the MUTE(VOLUME) knob to mute sound.
3. Short press the MENU•INFO button to view the current station information:
text information, signal strength, program type, episode name, channel
number/frequency, signal error rate, bit rate, time and date, etc.
4. Saving stations into preset mode:
(1) Long press SCAN button (if a full scan was previously done please move to step 2)
(2) Find the radio station by rotating the TUNE knob.
(3) Select the channel you want to save, and press the ENTER button to enter.
(4) Press and hold the PRESET button for 3 seconds.
(5) Pick one of the available (Empty) slots from the preset store screen.
(6) Press the ENTER button to save the channel.
You also can press and hold the Shortcut button 1/2/3 to add current radio
station into the preset list 1/2/3.
5. Short press the PRESET button to recall preset radio list. Rotate the TUNE knob
to select DAB station, then press the ENTER button to play. (You also can press
the Shortcut button 1/2/3 to go to preset list radio station 1/2/3 directly).
Note: Please press the PRESET button to access your preset radio stations in DAB
mode, otherwise the stations will display in automatically set order.
IMPORTANT INFORMATION REGARDING DAB+ RECEPTION
DAB+ radio reception is different from FM radio reception.
•
In FM, you can often still receive a weak station, but probably with a rustling or
crackling sound.
•
DAB + reception works digitally and if there is not enough signal you hear
nothing. No hiss or crackle as with FM. This is not due to the radio, but to the
fact that there is not enough DAB+ signal at that location.
•
DAB + rule is: no or weak reception = no sound.
12
Move the power