LENCO PDR-060WD Benutzeranleitung Seite 14

Bluetooth music play
1. Press the MODE.LUM button to switch to Bluetooth mode.
2. To use your Bluetooth enabled device, make sure the Bluetooth function is
enabled, then search for "Lenco PDR-060" on the list and click on it to connect.
3. Play music or any audio files from your Bluetooth enabled device. Rotate the
TUNE knob (or press the SKIP button) to go the next/previous track, turn the
volume knob to adjust volume.
4. Press the ENTER button to play/pause music. Press the VOLUME knob to mute
sound.
5. Long press the ENTER button to disconnect Bluetooth
This product operates at 2400 - 2483.5 MHz and is designated only to be used inside
a normal household environment. This product is suited for this purpose within all
EU counties.
"This product has a bluetooth reception function, you can not transmit any
bluetooth sound with it: this means that you can receive wirelessly a bluetooth
sound signal from an external source like a smartphone."
USB/micro SD card playback
1. Insert USB/micro SD card, and press the MODE.LUM button to switch to
USB/SD mode. It will play music from USB/micro SD automatically (Largest
capacity of USB/micro SD the device can support 256GB).
2. Rotate the TUNE knob (or press the SKIP button) to go the next/previous song.
3. Turn the VOLUME knob to adjust volume.
4. Press the ENTER button to play/pause music. Press the VOLUME knob to mute
sound.
5. Press the PRESET button to switch to loop playback mode. There are currently
three switchable: Repeat All/Repeat one/Random.
6. Supports audio decoding format: MP3/WAV/FLAC/WMA/APE.
System Set up
Press and hold the MENU•INFO button for 2~3 seconds to enter menu set up list.
Rotate the TUNE knob to select the sub-menu items, press the ENTER button to
confirm and enter. During operation, short press the IMENU•INFO button to return.
Time and Date Set up
A- In DAB radio mode, if DAB signal can be searched, the device will automatically
set the local time.
B- Manual Time Set up:
14