LENCO PDR-060WD Benutzeranleitung Seite 10

1. Standby button: Press it to enter/exit standby mode.
2. Volume knob/Mute button: Turn the knob -- Adjust volume Short press -- Mute
3. Alarm button: Press it to enter Alarm clock set up interface.
4. Shortcut button 1/2/3:
Short press 1/2/3 button to go to preset list radio station 1/2/3 directly.
Long press 1/2/3 button to add current radio station into the preset list 1/2/3.
5. MENU.INFO button
Short press -- Show DAB information Long press -- Enter menu set up
6. SCAN button
DAB/FM mode: Long press -- Automatic searching radio stations.
BT/USB/SD mode: Short press -- Play/Pause
7. SKIP-(Previous)/SLEEP/SNOOZE button FM/BT/USB/SD mode:
Short press -- SKIP-(Previous)
Alarm clock mode: When the alarm rings, short press to activate snooze
function. All modes: Long press -- Enter Sleep timer set up interface.
8. TUNE knob/ENTER button Turn the knob -- Skip+/- Short press -- Enter
DAB/FM mode: Long press -- Automatic searching radio stations.
9. PRESET button
DAB/FM mode: Short press -- Go to preset radio station list.
10. MODE.LUM button
Short press -- Switch between DAB/FM/AUX/BT/SD/USB modes.
Long press -- Adjust the display brightness level 1-2-3
11. SKIP+(Next)/SLEEP/SNOOZE button FM/BT/USB/SD mode:
Short press -- SKIP+(Next)
Alarm clock mode: When the alarm rings, short press to activate snooze
function. All modes: Long press -- Enter Sleep timer set up interface.
12. 2.8 inch TFT color display
13. Speaker
14. Remote sensor
15. USB port
16. 3.5mm Headphone jack
17. 3.5mm Aux-in jack
18. Antenna
19. Power switch
20. Charging port
21. Micro SD card (TF card) port
Long press -- Add current radio station to preset radio list.
10