Noise/Vibration Information; Technical Data - Bosch PSB 650 RA Bedienungsanleitung

14 Release button for dust collector*
15 Dust collector*
16 Dust protection ring*
17 Locking latch für dust collector*
18 Release button for extraction device*
19 Filter element (micro filtersystem)*
20 Level indicator of the dust collector*
21 Depth stop*
22 Button for depth stop adjustment*
23 Universal bit holder*
24 Screwdriver bit*
25 Front sleeve
26 Rear sleeve
27 Allen key**
*The accessories illustrated or described are not
included as standard delivery.
**Commercially available (not included in the delivery
scope)

Noise/Vibration Information

Measured values determined according to EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 97 dB(A); Sound power
level 108 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!

Technical Data

Impact Drill
Article number
Rated power input
Output power
No-load speed
Rated speed
Impact rate
Rated torque
Torque at max. output power
Speed preselection
Right/left rotation
Spindle lock
Dust extraction
Spindle collar dia.
Max. drilling dia.
– Concrete
– Steel
– Wood
– with extraction device mounted
Chuck clamping range
Weight according to
EPTA-Procedure 01/2003
– with extraction device
– without extraction device
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these val-
ues can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
2 609 002 371 • 11.5.07
All manuals and user guides at all-guides.com
Vibration total values (triax vector sum) determined
according to EN 60745:
Drilling into metal: Vibration emission value
a
h
Impact drilling into concrete: Vibration emission value
a
h
Screwdriving: Vibration emission value a
Uncertainty K = 1.5 m/s
ured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information sheet.
This could lead to a significant underestimate of expo-
sure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given period
of work should also take into account the times when
the tool is switched off and when it is running but not
actually doing the job. This may significantly reduce the
exposure level over the total working period.
PSB 530 RA
3 603 A26 1..
W 530
W 263
rpm 50 – 3000
rpm 2300
bpm 48000
Nm 1.0
Nm 7.5
mm 43
mm 13
mm 10
mm 20
mm 13
mm 2.0 – 13
kg 1.6
kg 1.5
/II
2
= 4.7 m/s , Uncertainty K = 1.5 m/s
2
= 24.2 m/s , Uncertainty K = 2.0 m/s
2
.
The vibration emission level given in
WARNING
this information sheet has been meas-
PSB 600 RE PSB 650 RE
3 603 A26 2.. 3 603 A26 2..
600
320
50 – 3000 50 – 3000
1900
48000
1.5
9.0
–
–
–
43
16
12
30
13
2.0 – 13
1.7
1.6
/II
2
,
2
,
2
< 2.5 m/s
h
PSB 650 RA
3 603 A26 3..
650 650
338 348
50 – 3000
1690 1690
48000 48000
1.9 1.9
9.0 9.0
–
43 43
16 16
12 12
30 30
13 13
2.0 – 13 2.0 – 13
1.7 1.7
1.6 1.6
/II /II
English | 15
,