Herunterladen Inhalt Inhalt Diese Seite drucken

Noise/Vibration Information; Rechargeable Battery; Inserting The Battery; Battery Charge Indicator - Bosch GBH 18V-40 C Professional Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für GBH 18V-40 C Professional:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
18 | English
Cordless rotary hammer
Recommended rechargeable batteries for max-
imum performance
Recommended chargers
Data transfer
®
Bluetooth
Signal interval
G)
Max. signal range
A) Measured at 20–25 °C with rechargeable battery GBA 18V 8.0Ah.
B) Pre-assembled
C) Can be retrofitted
D) Depends on battery in use
E) Limited performance at temperatures < 0 °C and > 40 °C
F) The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.2) and support the Generic Access Profile
(GAP).
G) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).

Noise/Vibration Information

Noise emission values determined according
to EN IEC 62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 93 dB(A); sound power
level 104 dB(A). Uncertainty K = 4 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN IEC 62841-2-6:
Hammer drilling into concrete: a
h
2
Chiselling: a
=7.0 m/s
, K=1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
1 609 92A 74B | (18.05.2022)
2
2
=7.5 m/s
, K=1.5 m/s
,
2
,
GBH 18V-40 C
ProCORE18V... ≥ 5.5 Ah ProCORE18V... ≥ 5.5 Ah
GAL 18...
GAX 18...
GAL 36...
®
Bluetooth
4.2
F)
(Low Energy)
s
8
m
30

Rechargeable battery

Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.
Charging the battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.

Inserting the Battery

Push the charged battery into the battery holder until it
clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.
The rechargeable battery has two locking levels to prevent
the battery from falling out if the battery release button is
pressed unintentionally. The rechargeable battery is held in
place by a spring when fitted in the power tool.

Battery charge indicator

The green LEDs on the battery charge indicator indicate the
state of charge of the battery. For safety reasons, it is only
possible to check the state of charge when the power tool is
not in operation.
GBH 18V-40 C
GAL 18...
GAX 18...
GAL 36...
®
Bluetooth
4.2
F)
(Low Energy)
8
30
Bosch Power Tools

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis