Eu Declaration Of Conformity - i.safe MOBILE IS-MP.2 Startanleitung

ENGLISH ENGLISH
INTRODUCTION INTRODUCTION
This document contains information and safety regulations which are to be observed This document contains information and safety regulations which are to be observed
without fail for safe operation of the device IS-MP.2 under the described conditions. without fail for safe operation of the device IS-MP.2 under the described conditions.
Non-observance of this information and instructions can have serious consequences Non-observance of this information and instructions can have serious consequences
and/or may violate regulations. and/or may violate regulations.
Please read the manual and these safety instructions before using the device. Please read the manual and these safety instructions before using the device.
In case of contradicting information, the text of these safety instructions shall apply. In case of contradicting information, the text of these safety instructions shall apply.
In case of any doubt, the German version shall apply. In case of any doubt, the German version shall apply.
The EU-declaration of conformity, certi cates, safety instructions and manuals can be The EU-declaration of conformity, certi cates, safety instructions and manuals can be
found at www.isafe-mobile.com, or requested from i.safe MOBILE GmbH. found at www.isafe-mobile.com, or requested from i.safe MOBILE GmbH.
RESERVATION RESERVATION
Technical Data is subject to change without notice. Changes, errors and misprints Technical Data is subject to change without notice. Changes, errors and misprints
may not be used as a basis for any claim for damages. All rights reserved. may not be used as a basis for any claim for damages. All rights reserved.
i.safe MOBILE GmbH cannot be held responsible for any data or other loss and direct i.safe MOBILE GmbH cannot be held responsible for any data or other loss and direct
or indirect damages caused by any improper use of this device. or indirect damages caused by any improper use of this device.
EX SPECIFICATIONS EX SPECIFICATIONS
The IS-MP.2 is a device suitable for use in potentially explosive atmospheres classi ed The IS-MP.2 is a device suitable for use in potentially explosive atmospheres classi ed
as zone 2/22 in accordance with directives 2014/34/EU and 2014/53/EU, as well as the as zone 2/22 in accordance with directives 2014/34/EU and 2014/53/EU, as well as the
IECEx scheme. IECEx scheme.
EX MARKINGS EX MARKINGS
ATEX: ATEX:
II 3G Ex ic IIC T4 Gc IP54 II 3G Ex ic IIC T4 Gc IP54 II 3G Ex ic IIC T4 Gc IP54
II 3D Ex ic IIIB T135°C Dc IP54 II 3D Ex ic IIIB T135°C Dc IP54 II 3D Ex ic IIIB T135°C Dc IP54
EU Type Examination Certi cate: EU Type Examination Certi cate:
EPS 16 ATEX 1 067 X EPS 16 ATEX 1 067 X
CE-designation: CE-designation:
IECEx: IECEx:
Ex ic IIC T4 Gc IP54 Ex ic IIC T4 Gc IP54
Ex ic IIIB T135 °C Dc IP54 Ex ic IIIB T135 °C Dc IP54
IECEx Certi cate: IECEx EPS 16.0026X IECEx Certi cate: IECEx EPS 16.0026X

EU DECLARATION OF CONFORMITY

EU DECLARATION OF CONFORMITY
The EU-declaration of conformity can be found at the end of this manual. The EU-declaration of conformity can be found at the end of this manual.
4 4
2004 2004 2004
Temperature range: Temperature range:
-20 °C ... +60 °C -20 °C ... +60 °C
Manufactured by: Manufactured by:
i.safe MOBILE GmbH i.safe MOBILE GmbH
i_Park Tauberfranken 10 i_Park Tauberfranken 10
97922 Lauda-Koenigshofen 97922 Lauda-Koenigshofen
Germany Germany