Bluetooth Connection; Human Interface Device Hid - i.safe MOBILE IS-MP.2 Startanleitung

READ OF TRANSPONDERS READ OF TRANSPONDERS
Hold the top of the device near to a transponder and make a short press on Hold the top of the device near to a transponder and make a short press on
If the transponder can be read, the display will indicate the transponder type and If the transponder can be read, the display will indicate the transponder type and
the UID and the device gives a short vibrate. the UID and the device gives a short vibrate.
If there is no transponder in reading area, the display will indicate "NO TAG" vibrate If there is no transponder in reading area, the display will indicate "NO TAG" vibrate
in a longer sequence. in a longer sequence.
The multipen will indicate automatically supported transponders as follows: The multipen will indicate automatically supported transponders as follows:
LF 125/134 kHz: EM 41xx, EM 42xx, HTS, FDX-B, HDX LF 125/134 kHz: EM 41xx, EM 42xx, HTS, FDX-B, HDX
HF 13,56 MHz: ISO 15693, ISO 14443, NFC HF 13,56 MHz: ISO 15693, ISO 14443, NFC
UHF 860 MHz ... 960 MHz UHF 860 MHz ... 960 MHz

BLUETOOTH CONNECTION

BLUETOOTH CONNECTION
Turn the IS-MP.2 ON Turn the IS-MP.2 ON
function. For pairing with other devices push and hold function. For pairing with other devices push and hold
indicate "Pairing Bluetooth ..." and after successful pairing the IS-MP.2 will be listed indicate "Pairing Bluetooth ..." and after successful pairing the IS-MP.2 will be listed
as RNBT-E5D5 in paired Bluetooth device. as RNBT-E5D5 in paired Bluetooth device.
The display of the IS-MP.2 will indicate "End of pairing". For existing connection The display of the IS-MP.2 will indicate "End of pairing". For existing connection
the display of the IS-MP.2 indicate a BT icon top right. For lost connection the BT icon the display of the IS-MP.2 indicate a BT icon top right. For lost connection the BT icon
will be framed. will be framed.
READ TRANSPONDERS ON PC OR ANDROID™ DEVICE READ TRANSPONDERS ON PC OR ANDROID™ DEVICE
For reading the transponders via Bluetooth you have to install "WINDOWS For reading the transponders via Bluetooth you have to install "WINDOWS
TIDMULTIPEN V.1.x" on PC. For Android device install the application TIDMULTIPEN V.1.x" on PC. For Android device install the application
"TECTUS MultiPen" available on Google Play™ Store. "TECTUS MultiPen" available on Google Play™ Store.

HUMAN INTERFACE DEVICE HID

HUMAN INTERFACE DEVICE HID
Powering O and connect the IS-MP.2 with the delivered USB cable to the Powering O and connect the IS-MP.2 with the delivered USB cable to the
USB port on your PC. The display of the IS-MP.2 lights up and indicate an USB icon USB port on your PC. The display of the IS-MP.2 lights up and indicate an USB icon
on top right of the display. on top right of the display.
Open an Excel sheet and read a transponder. The UID of the transponder Open an Excel sheet and read a transponder. The UID of the transponder
will be imported automatically to any position of cursor on PC. will be imported automatically to any position of cursor on PC.
8 8
[On/O [On/O Key]. Press Key]. Press [Key 2] [Key 2]
for turn On and O the Bluetooth for turn On and O the Bluetooth
[Key [Key
[Key [Key
2]. The Display will 2]. The Display will
1]. 1].