Jung FRWM200SW Betriebsanleitung Seite 49

Splint pin (activation backup) Splint pin (activation backup)
The splint pin (activation backup) is used during
the transport of the device to protect against
accidental activation.
After commissioning the device, the splint pin
(activation backup) is used as a tool for oper-
ating the radio button, and must be kept readily
available in the vicinity of the device.
Activation button Activation button
The activation button is used to turn the de-
vice on and off.
Magnetic carrier Magnetic carrier
The magnetic carrier is used for fastening the
device.
Signal LED Signal LED
The signal LED displays results and intermedi-
ate results during start-up of devices and set-
ting up of radio groups or shared radio groups.
EN
Operating Manual: FRWM200 – Smoke Alarm Device with Radio Link
Radio button Radio button
The radio button is used for setting up wireless
connections between the devices.
Smoke intake lamella Smoke intake lamella
Through the smoke intake lamella, fire smoke
reaches the interior of the device and can be
detected by sensors.
Testing / stop button Testing / stop button
(smoke alarm device cover) (smoke alarm device cover)
The testing / stop button (smoke alarm device
cover) is used for self-test, for correct wireless
connection between multiple devices, or be-
tween devices of one radio group.
The testing / stop button (smoke alarm device
cover) can be actuated to interrupt or stop the
alarm and alert tones.
49