Fitting The Directional Grille, Diffuser And Filter - Cameo G4 TW Bedienungsanleitung

4
3
To dismantle the headlamp, open the locking lever (fig. 3) and pull the headlamp downwards out
of the rail (fig. 4).

FITTING THE DIRECTIONAL GRILLE, DIFFUSER AND FILTER

Up to three optionally available accessories can be mounted in combination in front of the head-
lamp's exit lens (see OPTIONAL ACCESSORIES).
Remove the end ring held by strong magnets from the headlamp (fig. A) and then remove the
retaining ring, also held by magnets, from the end ring (fig. B). Now place the desired acces-
sories (in example C, first the straightening grid, then a diffusing disc and then a CTO filter) in
the end ring and then place the retaining ring on the accessories in the end ring. Which of the
three possible positions the retaining ring is placed in depends on the total height of the inserted
accessories.
A B C
21