Disposal; Declaration Of Conformity; Technical Details - tepro Hartford Bedienungsanleitung

• Remove the cooking grate and clean it
thoroughly with soapy water. Then dry
the grate carefully.
• Use a wet sponge to remove loose res-
idue from the grill.
• Empty out the cold ash and clean the
grill regularly, ideally after every use.
It is very important that you remove
the ash from the grill body before
any moisture combines with the
cold ash. Ash is saline and, in a mo-
ist condition, it will damage the in-
side of the grill body. If this happens
regularly over years, the grill body
can sustain damage through rust.
• Use a soft, clean cloth for drying. Do
not scratch the surfaces when wiping
them dry.
• Clean the inner and outer surfaces with
warm soapy water as a general prac-
tice.
• Tighten all bolts before every use to
ensure that the grill stands stable at all
times.

Disposal

The packaging is made from en-
vironmentally friendly materials,
which you can dispose of at your
local recycling points.
Do not under any circumstance
dispose of the BBQ in normal
household waste! Dispose of it at
an approved disposal business or
at your community disposal facili-
ty. Respect the currently valid reg-
ulations. If in doubt, get in touch
with your disposal facility.
P170050_TEPRO_00824_Hartford_K_DE_GB_20170824.indb 17

Declaration of conformity

This product is in compliance with the ap-
plicable European and national Directives
(DIN EN 1860-1).

Technical details

Product: Art. No. 00824,
Stainless steel
pedestal grill
„Hartford"
Weight: 58 x 43 x 82.5 cm
(BxTxH)
approx. 39 cm Ø
Overall dimension,
grill assembled:
Grill surface: approx. 5.1 kg
Max. amount of
fuel: max. 1.9 kg
t
17
24/8/2017 3:40 PM