Assembly; Preparation; Required Tools; Assembling The Grill - tepro Hartford Bedienungsanleitung

Assembly

Preparation

Danger Risk of injury!
Failure to follow these instruc-
tions can lead to problems and
risks while using the grill.
– Follow all of the assembly instructions
listed here.
1. First read through the entire assembly
instructions.
2. Allow yourself enough time for assem-
bly and find an even working space of
two to three square meters.
3. Small parts such as handles will prob-
ably be pre-assembled.

required tools

1 x Phillips screwdriver
1 x Adjustable spanner

Assembling the grill

1. Attach the slid vent (11) to the outer
side of the vertical column (10) using
bolt (A) and wing nut (E).
2. Fasten both parts of the vertical col-
umn (9+10) together using hex bolts
(B) and nuts (B).
3. Mount the base plate (13) to the as-
sembled vertical column using hex
bolts (B) and nuts (D).
4. Place the ash collector (12) under the
vertical column.
5. Mount the fire bowl (6) onto the vertical
column using hex bolts (B) and nuts (D).
P170050_TEPRO_00824_Hartford_K_DE_GB_20170824.indb 15
6. Connect both wind shield parts (3+4)
using two bolts (A) and nuts (C). Then
attach the assembly to the fire bowl
using bolts (A) and nuts (C).
7. Attach the handles (7) with pre-assem-
bled handle supports (8) to both sides
of the fire bowl (6) using bolts (A),
U-washers (F) and nuts (C).
8. Place the charcoal plate (5) in the fire
bowl (6).
9. Attach the grate grips (2) to the cook-
ing grate (1).
10. Place the cooking grate (1) in your
desired position on the windshield.
I
mportant: All screws must be
tightly fastened.

Setting up the grill

Attention Risk of damage!
During use, the screws can
loosen slowly and impair the
grill's stability.
– Check the stability of the screws prior
to each use. If necessary, tighten all of
the screws again to ensure the BBQ is
standing securely.
• Before use, place the grill on an even,
sturdy surface outdoors.
t
15
24/8/2017 3:40 PM