Makita UC250D Betriebsanleitung Seite 16

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Lock-off button
5 Switch trigger
6 Front hand guard
7 Lock
8 Unlock
9 Adjusting screw
10 Carabiner
(rope attachment point)
11 Indicator lamps
12 CHECK button
13 Slightly slide
14 Move in the upright position
15 Press in
16 Loosen
17 Sprocket cover
18 Adjusting dial
19 Sprocket
SPECIFICATIONS
Model
Chain speed per minute
Length of guide bar
Guide bar type
Type
Pitch
Saw chain
No. of drive
links
Number of teeth
Overall length
Net weight
Rated voltage
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for cutting branches.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
16
Explanation of general view
20 Adjusting pin
21 Small hole
22 Tighten
23 Lever
24 Low
25 High
26 Guide bar
27 Saw chain
28 Adapter
29 Hook
30 Tool
31 Belt
32 Arm cord hook band
33 Holder
34 Extension cord (Battery
adapter)
35 Adapter (Battery adapter)
36 Oil tank cap
37 Oil tank opening
BUC250
8.3 m/s (500 m/min)
250 mm
Sprocket
Carving bar
nose bar
91VG/91PX 25AP
3/8" 1/4"
40 60
6 9
576 mm 589 mm
4.5 kg
D.C. 36 V
ENE031-2
GEA010-1
38 Oil inspection window
39 Oil inspection window
40 Lower guide
41 Felling area
42 Felling direction
43 Danger zone
44 Escape route
45 Scabbard (chain cover)
46 File forward stroke
47 1/5 of the file diameter
48 Small dust or particles
49 Slotted bit screwdriver
50 Locking ring
51 Limit mark
52 Brush holder cap
53 Screwdriver
UC250D
8.3 m/s (500 m/min)
250 mm
Sprocket
Carving bar
nose bar
91VG/91PX 25AP
3/8" 1/4"
40 60
6 9
577 mm 590 mm
4.5 kg
D.C. 36 V
CORDLESS CHAIN SAW SAFETY WARNINGS:
1. Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw chain
is not contacting anything. A moment of inatten-
tion while operating chain saws may cause entan-
glement of your clothing or body with the saw chain.
2. Always hold the chain saw with your right hand
on the rear handle and your left hand on the
front handle. Holding the chain saw with a reversed
hand configuration increases the risk of personal
injury and should never be done.
3. Hold the power tool by insulated gripping sur-
faces only, because the saw chain may contact
hidden wiring. Saw chains contacting a "live" wire
may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
(for refilling the tank with oil)
BUC300 UC300D
8.3 m/s 8.3 m/s
(500 m/min) (500 m/min)
300 mm 300 mm
Sprocket Sprocket
nose bar nose bar
90SG 90SG
3/8" 3/8"
46 46
6
626 mm 627 mm
4.6 kg 4.6 kg
D.C. 36 V D.C. 36 V
6
GEB071-6