Inhaltsverzeichnis
Werbung
All manuals and user guides at all-guides.com
Determining the Cutting Line
When using the saw with guide rail always align cutting line (13a + b) at the
front and back of the base plate with your marked cutting line for straight cuts.
Guide Rail Splinter Guards
The guide rails come with a splinter guard(15) (black protruding rubber lip).
The splinter guard should be cut to size before first use. The splinter guard
ensures a tear-free cut, since the wood fibres at the top of the work piece are
torn without splinter guard. This is due to the saw blade teeth being directed
upward.
After cutting the splinter guard to size it also shows the precise cutting path of
the saw blade.
1. Place the plunge saw at the rear end of the guide rail.
2. Switch the plunge saw on and push the saw down. Cut the splinter guard
continuously over the entire length. The edge of the splinter guard now
exactly matches the cutting edge.
Plunge Cut with Guide Rail
1. Hold the plunge saw with both hands at handles (3) and (9).
2. Switch the plunge saw on and wait until it runs on full speed.
3. Push the saw slowly down and guide the saw towards the plunge position.
Saw Blades
External Diameter: Ø 110 mm
Bore Diameter: Ø 22.2 mm
Thickness: 2 mm
Number of Teeth/Segment: 40
Max. permissible Rotation Speed: 13000 min
Application: Saw Work
Material: Wood
External Diameter: Ø 110 mm
Bore Diameter: Ø 22.2 mm
Thickness: 2 mm
Number of Segments: 9
Working Speed max: 80 m/s
Max. Permissible Rotation Speed: 13000 min
Application: Cutting
Material: Tiles, Granite, Concrete
Operation
28
-1
-1
Werbung
Inhaltsverzeichnis
