Before The First Use; Contents Of The Package; Intended Use; The Laser - Westfalia HKS 1400 Originalanleitung

Before the first Use

Remove the circular saw and the accessories from the packaging. Check the
saw for transport damage and do not use the saw in case of damages. Keep
the packing materials away from children, risk of suffocation!

Contents of the Package

1x Circular Saw
1x Parallel Guide
1x Dust extraction Adapter
1x 6 mm Hey Key

Intended Use

The circular saw is intended to cut wood and similar materials, gypsum and
cement-bonded fibre materials and plastics.

The Laser

This circular saw is equipped with a line laser. With this laser you can easily
follow along a drawn line. The laser is turned on when the laser button (4) is
pressed.
The laser is powered by 2 x 1.5 V button cells (LR44). The battery
compartment is located above the laser emitter (5).
1. To open the battery compartment, loosen die securing screw and pull off
the battery compartment cover. Please observe correct polarity, the plus
(+) pole should face the laser emitter (5).
2. Close the battery compartment cover and secure it with the screw.

Switching the Circular Saw ON and OFF

1. Press the switch lock (1) and then the ON/OFF switch (2) to switch the
circular saw on.
2. Release the ON/OFF switch (2) to switch the circular saw off.

Setting the Cutting Depth

For a clear, clean cut, the saw blade should be set to a cutting depth not more
than 3 mm deeper than the strength of the work piece. This provides the best
impact angle of the teeth.
1. To set the cutting depth, loosen the lever (14). Now the desired cutting
depth can be set according to the scale.
2. After that, retighten the lever.
Operation
26