Removing Bottles; Uv Dye And Fresh Oil Bottle; Used Oil Bottle; Replacing Printer Paper - Bosch ACS 611 Originalbetriebsanleitung

en | 58 | ACS 611 | Maintenance
12.4

Removing bottles

!
Do not exert excessive force when removing or
inserting the UV dye, fresh oil and used oil bottles,
as this could damage the scales..
12.4.1

UV dye and fresh oil bottle

In order to remove the UV dye medium or fresh oil
bottle, slightly pull the connection downward and
detach the bottle downwards.
1.
2.
Fig. 5: Removing bottle
12.4.2

Used oil bottle

i
To remove the used oil bottle, pull the connection
slightly upwards and detach the bottle downwards.
1.
2.
Fig. 6: Removing bottle
i
Pay attention to the symbols on the service flap
showing the type of bottle.
|
1 689 989 600 2020-12-01
12.5

Replacing printer paper

!
Avoid excessive force so as not to damage the
printer cover.
1. Open the printer cover.
2. Remove old printer paper roll.
3. Fit new printer paper roll.
Fig. 7: Replacing printer paper
1 Printer paper
4. Close the printer cover.
i
To cut the printer paper correctly, pull the paper
towards the tear bar from one side to another.
12.6

Oil scales zero reset

i
The fresh oil and used oil scales should be reset to
zero regularly in order to ensure their accuracy and
to avoid tolerances.
!
Observe the ACS 611 menu prompting.
1. Call up the start screen.
2. Press <MENU>.
3. Select "ZEROING OIL SCALES" with o u and
confirm with E.
4. Remove fresh oil and used oil bottles and confirm
with E.
5. Re-attach fresh oil and used oil bottles and confirm
with E.
"
Fresh oil and used oil scales are reset to zero.
i
Return with <Stop>.
1
Robert Bosch GmbH