Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.3.2
Accessory set 1 687 010 493
i
This accessory set supplements the accessory set
1 687 010 402 on CB 18 with Oldham coupling and
lubricating oil return connection
Designation
Drive flange
Hexagon bolt
(2 x M12 x 35 DIN 933- 8.8)
Coupling
Fixing flange (for flange 78 mm)
Hexagon socket head bolt
(2 x M10 x 20 DIN 912-10.9)
Banjo union (for M10 x 1, ISO 8434-1-L15)
Flat sealing ring
(2 x DIN 7603 A10 x 13.5 x 1 mm)
i
The order numbers in the 'Scope of delivery' chapter
are only for information.
3.4
Special accessories
Designation
Pressure gauge 0–1600 kPa (0 – 16 bar)
Pressure gauge -100–500 kPa (-1 – 5 bar)
Parts set for drain valve (2 x)
Hydraulic hose (G 1/8 - coupling)
Coupling half (for cone D = 20 mm)
Robert Bosch GmbH
3.5
3.5.1
1. Insert the "EP software" CD in the DVD/CD drive.
Installation of the software then starts automat-
The dialog box, "Select Setup Language", is dis-
Pos. number
2. Comply with the instructions and install the software.
1 685 702 105
–
3.5.2
1. End all open applications.
1 686 432 025
2. Insert the CD "CD-TestData" in the DVD drive.
1 685 720 354
A few seconds after insertion, the dialog window
–
1 683 385 064
3. Select a language (e.g. "German" for Germany).
2 916 710 605
4. Confirm selection with <OK>.
The start mask appears.
5. Heed the information in the start mask and press
<Next> to proceed with installation.
6. Press <Next> to proceed with installation.
7. Heed the information in the dialog window and
press <Install> to proceed with installation.
Database installation is started. Following instal-
Part number
0 986 613 102
8. Conclude installation with <Complete>.
"
0 986 613 103
The file "TestData NEWS" is displayed.
0 986 615 075
1 680 712 327
1 686 430 024
| 1 687 010 402 / ... 493 | 17
Initial start-up
Installing the EPS 945 software
ically.
played.
Installing the CD-TestData
"Select setup languages" appears.
lation, a dialog window is called up.
1 689 989 211
en
|
2015-08-04
Werbung
Inhaltsverzeichnis
