Changing The Rollers - Bosch DAS 3000 Reparaturanleitung

en | 32 | DAS 3000
3. Loosen the knurled screw in the calibration board retainer Y
frame.
1
(1) Calibration board retainer Y
(2) Rear cover
4. Insert new calibration board retainer Y In the edge protection frame and secure it with the knurled screw.
5. Attach the rear cover to the edge protection frame.
6. Attach the front cover to the frame.
---
3.6

Changing the rollers

• Suitable lifting tool
• Second person who secures the DAS 3000
---
1. Remove the magnetic indicator bar from the edge protection frame and secure it in the parked position.
2. Remove the DUAL -Board or other calibration boards from the edge protection frame and store them in a safe lo‐
cation.
 No calibration board is positioned on the edge protection frame.
3. Place the mounting adapter on the handle.
4. If present, remove Multi-Target-Shop from the trolley.
5. Remove all other loose objects on or around the DAS 3000 so that nothing can fall off the DAS 3000.
6. Remove the cover plate
1
(1) Cover plate
7. Slide the lifting tool under the DAS 3000 so that the DAS 3000 can be raised evenly and safely.
8. Make sure that the lifting tool does not damage the rubber buffer of the brake when lifting.
1 689 975 292 | 2020-02-28
2
(1)
at the bottom of the trolley.
(1)
and slide it up and out of the edge protection
Robert Bosch GmbH