Link Connections; Connection To The Host Unit - Sony MG10-P1 Bedienungsanleitung

3-6. Link Connections

1
Connect the LINK OUT connector on the main module of the
unit connected to the host unit and the LINK IN connector on
the main module of the unit to be connected by link connection
using the link cable (LZ61).
If the link cable is not long enough, use the CE08 extension cable
sold separately to extend it.
n
The multi interface unit will not work if the LINK IN connector
and LINK OUT connector are connected the wrong way round.
MG10-P1 / MG10-P2

3-7. Connection to the Host Unit

1
Connect the RS-232C cable (DZ252) sold separately to the
RS-232C connector of the host unit.
RS-232C cable
Host unit
Link cable
Link cable
Main module
I/F module
Counter module
Multi interface unit
11
(E)