Connecting The Measuring Units; Connecting The Power Connector - Sony MG10-P1 Bedienungsanleitung

3-4. Connecting the Measuring Units

1
Connect the measuring units to the measuring unit connectors
on the counter modules.
n
Be sure to connect the measuring unit corresponding to the
counter module. Connecting the wrong measuring unit can
cause a breakdown of the connector.
10
(E)

3-5. Connecting the Power Connector

1
Wire the accessory 3-pin connector to the external power
supply.
No. I/O Signal
3 — GND
2 — Vin
1 — FG
2
Connect the wired 3-pin connector to the power input socket.
n
Be sure to turn off the power before making the connection.
Description
Ground
DC +12 V to +24 V
Frame ground
MG10-P1 / MG10-P2