Arm Rest Control Panel - Kärcher MC 130 plus Betriebsanleitung

Arm rest control panel

The control panel is located on the left arm rest of the driver's
seat. The arm rest can be individually adjusted to suit the driver,
see chapter Setting the driver's seat.
For left-hand drive vehicles (optional), e.g. for the UK, the control
panel is located on the right arm rest of the driver's seat.
Device carrier control assignments
Front power lift joystick
1
– Raise front power lift and front PTO off (back)
– Lower front power lift and front PTO on (forwards)
– Operate AUX 1 (right/left)
– Switch on front power lift floating position (forwards)
– Switch off front power lift floating position (back)
AUX 2 and AUX 3 joystick
2
– Operate AUX 2 (forwards/back)
– Operate AUX 3 (left)
Not used
3
PTO on/off
4
Electrical AUX 1, front
5
Electrical AUX 2, front
6
Electrical AUX 1, rear
7
Not used
8
The ECO function switches the complete work program on
9
PTO, front AUX 1, front AUX 2, rear AUX 3 , rear AUX 1
Electrical AUX 2, rear
10
(A) Front PTO 20 litres
The hydraulic power can be adjusted via a potentiometer
(B) Rear PTO 20 or 40 litres
The hydraulic power can be adjusted via a potentiometer
(C) Button for setting the engine speed
Note
The speed can be adjusted in steps of 100 rpm.
(D) Not used
(E) Not used
(F) Press the button to save set values or programs and open
submenus.
(G) Rotary knob for changing values and selecting programs.
Control assignments for a vacuum sweeper with a 2-brush
Left side brush joystick
1
– Switch off side brush off rotation (back)
– Lower/extend/Switch on side brush rotation (left)
– Retract/lift (right)
Right side brush joystick
2
– Switch off side brush off rotation (back)
– Lower/extend/Switch on side brush rotation (right)
– Retract/raise (left)
Raise/lower suction mouth
3
PTO on/off
4
Not used
5
Not used
6
Water circulation function on/off (recycling water)
7
Suction fan on/off
8
ECO function for switching the entire work program on
9
PTO (side brush, suction fan), fresh water, water circulation
(recycling water)
Water pump on/off
10
(A) Button for setting the side brush speed
(B) Not used
(C) Button for setting the engine speed
Note
The suction power depends on the set engine speed.
 1850 rpm Light waste
 2350 rpm Normal soiling
 2850 rpm Strong, heavy soiling
(D) Not used
(E) Not used
(F) Press the Save button to save set values or programs.
(G) Rotary knob for changing values and selecting programs.
English
system
63