Select The Grid Standard - Bosch BPT-S Hybrid Installationsanleitung

English
Bosch Power Tec GmbH
8.4

Select the grid standard

Prerequisites
The Grid standard window is open.

 The grid standard to be set is specified by the grid
operator.
Info
The grid standard cannot be changed once it has
been set. To change the setting, the storage system
must be restored to the factory setting.
▶
Procedure
1. Use the arrows in the Grid standard input field to
select the appropriate standard
2. Press Apply
8.4: The grid standard window
■
The grid standard is set.
Commissioning | 115
Storage system | Installation manual