Bosch BPT-S Hybrid Installationsanleitung Seite 241

English
Bosch Power Tec GmbH
6.35: Secure the earthing cable
2. Place the housing cover on top of the housing and
position the countersunk holes over the threads.
3. Use the 4 mm Allen key to screw down the cover
with eight M6 countersunk screws (tightening
torque: on the corners: 2.7 Nm, in the centre: 0.1
Nm)
6.36: Screw down the housing cover
■
The housing cover is installed.
Installation | 97
Storage system | Installation manual