Removing The External Housing Parts; Removing The Housing Cover - Bosch BPT-S Hybrid Installationsanleitung

58 | Installation
Storage system | Installation manual
6.2 Removing the external housing
parts
Materials required
 For Allen screws: Allen key sizes 2.5 / 3 / 4 and 5
For hex nuts: Spanner with width across flats 5, 8

and 10
In order to install the individual components in the
storage system, you must first remove all external
parts from the housing. You must also remove the
ventilation grille and the battery cover from the
housing.
6.2.1

Removing the housing cover

▶
Procedure
1. Top of the housing: Use the 4 mm Allen key to
remove the eight M6 countersunk screws
6.1: Screws on the housing cover
English
Bosch Power Tec GmbH