External Cabling; Remove The Shielding Plate - Bosch BPT-S Hybrid Installationsanleitung

English
Bosch Power Tec GmbH
7

External cabling

This chapter only provides an example of how to

connect the storage system's external connection to
the in-house grid. How you connect the storage
system on site depends on the local conditions.
Observe the planning documents when doing this.
You must observe the guidelines for planning,

installing and operating systems with emergency
power units from the Association of German
Network Operators.
The example described in this chapter for

connecting to the in-house grid can also be found in
the external cabling diagram in this instruction
manual.
7.1

Remove the shielding plate

▶
Procedure
1. Use the 3 mm Allen key to remove the four M5
rounded head screws and washers
2. Remove the earthing
7.1: Shielding plate
3. Remove the shielding plate
■
The shielding plate has been removed.
External cabling | 101
Storage system | Installation manual