Bosch BPT-S Hybrid Installationsanleitung Seite 231

English
Bosch Power Tec GmbH
[5]
24 V terminal no. 2
[6]
24 V terminal no. 3
[7]
Auxiliary supply
[8]
BAT+ terminal (blue point)
[9]
BAT- terminal (blue point)
[10]
AC backup cable terminal
▶
Procedure
1. Connect the 24 V BMM power cable to terminal (6)
2. Connect the 24 V battery switch power cable to
terminal (5)
3. Connect the 24 V EMS power cable to terminal (4)
4. Connect the cable for the external fan to terminal
(3)
5. Connect the CAN-bus cable for the EMS to the CAN
In terminal (1) and connect the AC backup cable to
terminal (10)
6. Connect the auxiliary power supply plug to
terminal (7)
7. Connect the BAT+ cable to the BAT+ terminal (8)
(blue connection point on the battery converter)
8. Connect the BAT- cable to the BAT- terminal (9)
(blue connection point on the battery converter)
■
The battery converter is connected to the cable
harness.
Installation | 87
Storage system | Installation manual