Werbung
• Prop up large panels in order to minimise the risk of a kickback
by a jammed saw blade. Large panels tend to sag under their
own weight. Panels must be supported on both sides, both in
the vicinity of the saw gap as well as on the edge.
• Do not use dull or damaged saw blades. Saw blades with blunt
or misaligned teeth cause increased friction, jamming of the
saw blade and kickback by an excessively narrow saw gap.
Tighten the cutting depth position prior to cutting. If the settings
change while cutting, the saw blade can jam and a kickback
can occur.
• Be especially careful if you perform a "plunge cut" in a hidden
area, such as an existing wall. The protruding saw blade can
get blocked in hidden objects while cutting and cause a kick-
back.
All manuals and user guides at all-guides.com
Safety Notes
9
Werbung
