Merax MS282991 Bedienungsanleitung Seite 30

B. If your instantaneous step stops the running belt, but the multi-wedge belt and former roller is still
running, it indicates that the running belt is loose and appropriate adjustments must be made to
facilitate the safe use
C. If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt stop, but
the motor is still running, it indicates that the multi-wedge belt is loose and appropriate adjustments
must be made to facilitate the safe use
Step 2: Use a wrench to adjust the screws on the motor base according the condition. Meanwhile,
gently flip the multi-wedge belt between the motor shaft and the front roller, if it is too loose, you can
flip the multi-wedge belt by 100%; if it is too tight, the degree for you to flip the belt is very limited.
It is appropriate to flip the multi-wedge belt by 80% after adjustment. Please adjust the tightness of
the multi-wedge belt into the state that it could be flipped by 80%.
Step 3: Finally lock the motor base, and install the front cover.
Applying silicone oil
Step 1: Lift the running belt slightly.
Step 2: Open the silicone oil bottle, squeeze the silicone oil on the sides of running board, as shown
in the following picture:
Bluetooth APP Function
This machine is equipped with Bluetooth APP and can be also connected with "Kinomap". Please use
your phone to scan the QR code provided below to download the app and track your fitness data.
30