Countdown - Hama Mini Bedienungsanleitung

Display
MO TU WE TH
FR SA SU
MO > TU > WE > TH
> FR > SA > SU
MO WE FR
TU TH SA
SA SU
MO TU WE
TH FR SA
MO TU WE TH FR
MO TU WE TH FR SA
Weekdays on which the connected device is to be
switched on/off (see table)
• Hours: Time at which the connected device is to be
switched on/off
• Minutes: Time at which the connected device is to
be switched on/off
To select the individual values, press the + button
(7) or the V– button (8) and con rm the selection by
pressing the SET button (6).
• Press the + button (7) or the V- button (8) again to
select further programs if necessary and make the
settings accordingly.
• Press the CLOCK button (2) to exit the settings.
• If no buttons are pressed for 15 seconds, the display
jumps back to the current time. The settings made
so far are saved.
4
Program valid for
Every weekday
Single day:
Monday > Tuesday >
Wednesday > Thursday
> Friday > Saturday OR
Sunday
Monday, Wednesday
and Friday
Tuesday, Thursday and
Saturday
Saturday and Sunday
Monday, Tuesday and
Wednesday
Thursday, Friday,
Saturday
Monday to Friday
Monday to Saturday
Note - Programming
• Make sure to program the switch-on and switch-
off time for each program. For example, if you
make the settings for 3ON, you also program the
switch-off time under 3OFF.
• To change a program that has already been
created, make the settings again as described
above, thereby overwriting the original
programming.

4.3 Countdown

You can set a countdown after which the connected
device is switched on or off.
Settings
• Press the V- button (8) until d ON or d OFF is shown
on the lower left side of the display.
• Press the SET button (6) until the ON / OFF indicator
starts ashing.
• Set the following information in sequence:
• Countdown mode that switches the connected
device on or off for the set countdown duration
(d ON / d OFF)
• Countdown duration (between 00:00:01 and
99:59:59)
• To select the individual values, press the + button
(7) or the V– button (8) and con rm the selection by
pressing the SET button (6).
• Press the CLOCK button (2) to exit the settings.
Activation
• First proceed as described in point 5. Operation and
activate the AUTO operating mode.
• Press the C.D. button (3) to start the countdown. CD
ashes in the lower left corner of the display.
• After the set countdown time has elapsed, the
connected device is switched on or off.
• Press the C.D. button (3) again to stop the
countdown. The CD indicator goes out.
Note - Countdown
• To change the countdown, make the settings
again as described above, thereby overwriting the
original programming.
• If the countdown has already started, press the
V- button (8) while the current time is displayed
to display the remaining countdown time.