Switches Setting - Adjustment - Indicators; Description - Cristec YPOWER 12V/25A Bedienungsanleitung

3.3 S
WITCHES SETTING

3.3.1 Description

The YPOWER chargers are equipped with switches to configure the charger according the battery type and the
application.
1 = ON
0 = OFF
2 charging modes are available :
- The BOOST function enables a faster charge of the batteries. This function is timed controlled (see table here after)
and is automatically switched off when the battery is fully charged : BOOST stops when batteries current < 20% of
charger rated current. The BOOST function can also be disabled by means of a switch (E).
- The REFRESH function enables to apply periodically a voltage step to maintain the battery, to promote its equalization
and prevent from any sulphation. This function is activated by means of a switch (F).
1 = ON
0 = OFF
- -
ADJUSTMENT INDICATORS
35