Get Your Honbike Ready; Unboxing - HONBIKE U4 Benutzerhandbuch

Get your HONBIKE ready

Unboxing

Visit www.honbike.com to view corresponding videos to install and use HONBIKE
U4 correctly. HONBIKE packaging is delicately designed for the safe transportation
of electric bicycle. We recommend that you keep HONBIKE original packaging for
at least one month in case you need to send your HONBIKE U4 for service or
maintenance.
Please assemble the bicycle on a smooth indoor surface or carpet to avoid scratching it.
1. Open the carton carefully and try
not to damage it. Take out the foam.
2. Take the bicycle out of the
carton carefully by holding the
seat tube and handlebar (as
shown in the picture). Please do
not hold on to the front wheel and
the fender when lifting upwards.
5
It is recommended to operate by two people.
3. Rotate the handlebar
anticlockwise, as shown in the
figure. Make sure the groove on the
stem is aligned with the mark on
the head tube.
4. Flip the bicycle 180 degrees and place
it on levelled ground. Ensure that the
bicycle does not fall.
Before the front wheel is installed, the
bicycle may not maintain balance.
Please add auxiliary support when you
encounter similar problems.
EN
Place the bicycle frame on a soft carpet
or lay a cloth on the ground to prevent
damage to the frame body.
6