Removing The Battery - Meec tools 021614 Bedienungsanleitung/Übersetzung Der Originalanleitung

REMOVING THE BATTERY

Press the battery lock button and remove the battery from the
power tool.
MAINTENANCE
WARNING!
Remove the battery from the power tool/charger before
cleaning and/or maintenance, otherwise there is a risk of
electric shock and/or personal injury.
CLEANING
• Wipe the battery with a dry or damp cloth. Do not use wet
cloths. Do not use solvent, strong, or corrosive or abrasive
detergents. This can damage the surface of the product.
• Clean the battery terminals and battery lock button after use.
Do not use sharp or pointed things to clean the terminals.
• Dirt that has accumulated in places difficult to reach can be
removed with compressed air of up to 3 bar.
• Check at regular intervals that all screw unions and other
unions are correctly tightened. Tighten any loose unions
immediately, otherwise there is a risk of serious personal
injury.
STORAGE
• Fully charge the battery and disconnect it from the charger
before putting it into storage.
EN
39