Meec tools 021614 Bedienungsanleitung/Übersetzung Der Originalanleitung Seite 33

• Follow the instructions for charging and charge the battery
only at the temperature indicated in the instructions.
Incorrect charging or charging outside the given
temperature range can damage the battery and cause a fire.
• Power tools must only be serviced by qualified personnel
using identical spare parts. This will ensure that the power
tool remains safe to use.
• Never attempt to repair damaged batteries. The battery
must only be serviced by the manufacturer or at an
authorised service centre.
SAFETY INSTRUCTIONS FOR LITHIUM BATTERIES
• Do not open the battery – risk of short circuiting.
• Do not expose batteries to moisture, direct sunlight or heat
– risk of explosion.
• If the battery is damaged or used incorrectly it can emit gas.
Ventilate the area and seek medical attention if you
experience discomfort. Gas can irritate the respiratory organs.
• Failure to handle the battery carefully can cause fluid to leak
from the battery. Avoid contact with battery fluid. On contact
with battery fluid, rinse immediately with plenty of fresh water.
Seek medical attention on eye contact with battery fluid.
Fluid leaking from the battery can cause irritation or burns.
• Only use original batteries from the manufacturer, with the
voltage specified on the type plate on the power tool.
The use of non original batteries or reconditioned batteries
can result in a risk of explosion and personal injury.
• Check that the rated voltage of the battery corresponds to
the rated voltage on the type plate on the charger.
The charging of other batteries can cause a fire risk and/or
explosion.
EN
33